6 el 50MHz LFA-R reflectorless Yagi

6 el 50MHz LFA-R reflectorless Yagi
Click image for Gallery
  • Brand: InnovAntennas
  • Product Code: 6 el 50MHz LFA-R reflectorless Yagi
  • Availability: Not in stock
- +

The new LFA-R reflector-less Yagi is a step forward in Yagi design and performance. Excellent levels of gain per foot of boom from this compact super-performer

The new 6R6-HD from InnovAntennas Exclusive

Heavy duty version show, light-weight version available upon request.
See a review of the LFA-R antenna HERE!

The new LFA-R is a new, reflector-less Yagi from the design table of G0KSC. The LFA-R provides excellent performance in terms of both forward gain and F/B too and covers the important bottom end of the 50MHz band with ease.

The 6R6 sits on  a 6.5m (21') boom yet punches with a very respectable 12.1dBi gain while still delivering well over 21dB F/B (front to back) ratio.


The 6R6 6 element 50MHz LFA-R being installed by XE2K



The 6R6 heavy-duty boom to mast assembly with all marine-grade (A4) Stainless Steel hardware



A close-up view of the rear of the 6R6. Heavy-duty element plating and Vibration Damped System (VDS) insulators (with rubber inserts installed, available at extra cost) all add up to the 6R6 being one of the most study and weather resistant 6m antennas in production


Product Highlights


  • Marine grade Stainless Steel Fittings
  • Original Stauff Insulation clamps
  • Mill finished boom and elements for highest levels of accuracy
  • Optimised by computer for best possible performance
  • No matching device means no matching loss!
  • Easy and fast fit, assemble in just a few minutes



Gain: 12.20dBi @ 50.15MHz

F/B: 20.90dB @ 50.15MHz

Peak Gain: 12.22dBi

Gain 10m above ground: 17.61dBi

Peak F/B: 25.56dB

Power Rating: 5kw

SWR: Below 1.5.1 from 50MHz to 50.4MHz

Boom Length: 6.6m

Weight: 10kg/22lbs

Safe Wind Speed: 160Kph/100Mph

Turning Radius: 3.2m/10' 5''ft

Vertical Stacking: 5.75m



This antenna is made with a 5/8 inch (15.88mm) and 1/2 inch (12.7mm) diameter tube LFA loop which has 3/8 inch (9.525mm) loop ends with a wall thickness of 1.6mm. Parasitic elements are tapered, 5/8'' to 1/2'' tube ensuring high performance for many years to come. Boom is 1.5inch. This antenna is not made cheaply, it is made to perform and to do so for many years.

No figures are made up here as they are in some Ham Radio adverts, all performance figures are verified in the very latest software simulation packages with some antennas being professionally confirmed on an antenna range.



Azimuth Plot



Elevation plot @ 10m above ground





Manufactured the right way, not the cheapest way!

* Where possible marine grade stainless steel components are used.

Write a review

Note: HTML is not translated!
    Bad           Good