7 element 70MHz LFA-WOS Yagi

Brand: InnovAntennas
Product Code: 7 element 70MHz LFA-WOS Yagi
Availability: 1-3 weeks
3.269kr
Ex Tax: 2.615kr
From 98kr

Qty

 

 High Gain 70MHz LFA Yagi optimised for urban environments and reduction of inband noise, including other stations!

The antenna is a scaled and re-optimised version of the 50MHz LFA WOS originally designed for G3WOS

The G0KSC LFA Yagi is a major step forward in the development of the Yagi Antenna; it provides a low-noise front-end for your radio so you hear more weak signals.  If you suffer with noise or are in a city location, this is the antenna for you. This 7 element 70Mhz LFA provides stunning performance across the whole 4m band (69.900 - 70.500MHz).  Hard to beat with a direct 50 Ohm feed-point and no matching losses!!

This is an excellent stacker requiring just 4.4m spacing. See details below.

 

Performance

Gain:12.98dBi @ 70.200MHz

Gain at 10m above ground: 18.76dBi

F/B: 27.48dB @ 70.200MHz

Peak Gain: 13.02dBi

Peak F/B: 27.98dB

Power Rating: 5kw

SWR: Below 1.1:1 from 69.900MHz to 70.500MHz

Boom Length: 6.796m

Stacking Distance: 4.4m Vertically, 4.9m horizontally

2 Stacked Gain: 15.65dBi

2 Stacked Gain 15m up above average ground: 21.12dBi

2 Stacked F/B: 30.41dB

 

Specification

This antenna is made with single piece 1/2 inch 18swg T6 aluminium tube tapering to 3/8 inch tube at the element tips. The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts.  Boom is 1.5 inch square 16SWG aluminium Kevlar guys required and supplied with stainless steel turnbuckles for adjustment.

  • Marine grade Stainless Steel Fittings*
  • Original Stauff Insulation clamps
  • Mill finished boom and elements for highest levels of accuracy

 

alt

Azimuth Plot

 

alt

Elevation Plot

 

alt

1 x 7el LFA at 15m above ground

 

alt

2 x 7el stacked at 4.9m apart 15m above average ground

 

alt

SWR

alt

A 7el 70MHz LFA installed above a 7el 50MHz LFA at PA7F

 

Manufactured the right way, not the cheapest way!

Where possible marine grade stainless steel fittings are used.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Downloads