8 element 50MHz OP-DES Yagi (9.9m)

Brand: InnovAntennas
Product Code: 8 element 50MHz OP-DES Yagi (9.9m)
Availability: 1-3 weeks
5.119kr
Ex Tax: 4.095kr
From 154kr

Qty

 

An 8 element wideband 50-50.5MHz OP-DES (Opposing Phase Driven Element System) Yagi  - Second Generation OP-DES Yagi !

The OP-DES is the newest in patent technology produced by InnovAntennas and is specifically designed for maximum performance, wide-band applications. Read more about the OP-DES Yagi Here. InnovAntennas use the latest in Electromagnetic Design Technology to ensure the very best results and the OP-DES Yagi is proof of that!

This antenna has a flat SWR curve covering 50.0-50.50MHz at 1.1:1 SWR. The super 8el has incredible rearward suppression and a huge punch too, Take a look!

Performance

Gain: 13.13dBi @ 50.150MHz

F/B: 32.00dB @ 50.150MHz

Peak Gain: 13.20dBi

Gain at 10m above Ground: 18.49dBi

Peak F/B: 32.89dB

Power Rating: 5kw

SWR: Below 1.1:1 from 50.00MHz to 50.50MHz

 

Stacking Distance: 6.0-6.9m ( 6.5m recommended)

2 Stacked Gain @ 6.5m spacing: 15.88dBi

2 Stacked F/B: 37.40dB

2 Stacked Gain @ 6.5m Spacing 10m above ground: 20.87dBi

Boom Length: 9.920m

Weight: 15.79Kg / 34.8LB

Turning Radius: 5.186m / 17.0ft

Wind Loading: 0.44 Square Metres / 4.78 Square feet

Wind Survival: 203KPH / 127MPH

Other options available if higher wind loading/survival is required.

 

Specification

This antenna is made with 1/2 inch (12.7mm) centre elements and 3/8 inch (9.525mm) outer elements with the OP-DES end sections 3/8 inch (9.525mm). The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts.  Boom is 1.75 inch (44.45mm) square 10 SWG aluminum (3.2mm wall).

A T-bar guy system using Marine grade turnbuckles and Kevlar support guys is supplied with this antenna.

OTHER TAPER SCHEDULES ARE AVAILABLE FOR THIS ANTENNA, CALL OR EMAIL FOR DETAILS

Our antennas are constructed with the best quality materials in order that the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, ensuring they work as well as our software model predicts.

Note: Much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up of our antennas have least effect on performance and pattern degradation. More information can be found here

  • Marine grade Stainless Steel Fittings
  • Original Stauff Insulation clamps
  • Mill finished boom and elements for highest levels of accuracy
  • Guy support hardware is supplied with this antenna

 

alt

Azimuth Plot

 

alt

Elevation Plot

 

alt

Single 8 element OP-DES up 10m above ground

 

alt

2 x 8el OP-DES Yagi 6.5m apart with the bottom antenna 10m above ground

 

alt

SWR

 

alt

How the OP-DES looks; A 6el

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Downloads