6 element 50MHz OP-DES Yagi (4.8m)
A 6 element wideband 50-50.6MHz OP-DES (Opposing Phase Driven Element System) Yagi - Second Generation OP-DES Yagi !
The OP-DES is the newest in patent technology produced by InnovAntennas and is specifically designed for maximum performance, wide-band applications. Read more about the OP-DES Yagi Here. InnovAntennas use the latest in Electromagnetic Design Technology to ensure the very best results and the OP-DES Yagi is proof of that!
This antenna has a flat SWR curve covering 50.0-50.60MHz at 1.1:1 SWR. The super-compact 6el has incredible rearward suppression and a huge punch too, Take a look!
Gain: 11.03dBi @ 50.150MHz
F/B: 32.85dB @ 50.150MHz
Peak Gain: 11.10dBi
Gain at 10m above Ground: 16.51dBi
Peak F/B: 33.10dB
Power Rating: 5kw
SWR: Below 1.1:1 from 50.000MHz to 50.60MHz
Stacking Distance: 4.5-5.3m ( 4.9m recommended)
2 Stacked Gain @ 4.9m spacing: 13.87dBi
2 Stacked F/B: 36.99dB
2 Stacked Gain @ 4.9m Spacing 10m above ground: 19.06dBi
Boom Length: 4.840m
Weight: 6Kg / 13.22LB
Turning Radius: 2.88m / 9.45ft
Wind Loading: 0.22 Square Metres / 2.31 Square feet
Wind Survival: 216KPH / 134MPH
Other options available if higher wind loading/survival is required.
This antenna is made with 1/2 inch (12.7mm) centre elements and 3/8 inch (9.525mm) outer elements with the OP-DES end sections 3/8 inch (9.525mm). The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts. Boom is 1.5 inch (38.1mm) square 16SWG aluminum.
OTHER TAPER SCHEDULES ARE AVAILABLE FOR THIS ANTENNA, CALL OR EMAIL FOR DETAILS
Our antennas are constructed with the best quality materials in order that the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, ensuring they work as well as our software model predicts.
Note: Much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up of our antennas have least effect on performance and pattern degradation. More information can be found here
- Marine grade Stainless Steel Fittings
- Original Stauff Insulation clamps
- Mill finished boom and elements for highest levels of accuracy
Single 6 element OP-DES up 10m above ground
2 x 6el OP-DES Yagi 4.9m apart with the bottom antenna 10m above ground
How the OP-DES looks; A 6el 10m OP-DES
Manufactured the right way, not the cheapest way!