6 element 50MHz LFA-3 (8.2M)

Brand: InnovAntennas
Product Code: 6 element 50MHz LFA-3 (8.2M)
Availability: 1-3 weeks
3.839kr
Ex Tax: 3.071kr
From 115kr

Qty

 

A 6 element low-noise LFA-3 thrid generation LFA Yagi designed by G0KSC for 2017!

The G0KSC LFA Yagi is a major step forward in the development of the Yagi Antenna; it provides a low-noise front-end for your radio so you hear more weak signals. The 5 element 50Mhz LFA-3 provides stunning performance across the important section of the 6m band (50.00 - 50.300MHz) with excellent gain levels for its size. the LFA-3 is a result of many years of optimisation honing resulting in a wide-spaced Yagi with all the associated benefits of the original LFA with higher gain per foot of boom!

Performance

Gain: 12.81dBi @ 50.150MHz

F/B: 27.62dB @ 50.150MHz

Peak Gain: 12.90dBi

Peak F/B: 27.76dB

Power Rating: 7kw

SWR: Below 1.1:5 from 50.00MHz to 50.300MHz

Stacking Distance:  7m recommended

2 Stacked Gain @ 7m spacing: 15.70dBi

2 Stacked F/B: 25.74dB

2 Stacked Gain @ 4.70m Spacing 10m above ground: 20.64dBi

Boom Length: 8.2m

Weight: 7.23Kg / 16LB

Turning Radius: 4.3m / 14.2ft

Wind Loading: 0.28 Square Metres / 3 Square feet

Wind Survival: 176KPH / 110MPH

Other options available if higher wind loading/survival is required.

 

Specification

This antenna is made with 5/8 inch (15.88mm) centre elements and 1/2 inch (1.27mm) outer tip sections. the boom is made from 1.5'' square tube with a wall thicknes of 16swg, a boom guy is supplied. The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts.

Our antennas are constructed with the best quality materials in order that the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, this ensures they work as well as our software model predicts.

Note: Much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up of our antennas have least effect on performance and pattern degradation. More information can be found here

  • Marine grade Stainless Steel Fittings
  • Original Stauff Insulation clamps
  • Mill finished boom and elements for highest levels of accuracy

 

4 x 5el LFA-3 @ KD7DCR

If you require a full stacked system, antennerna.se can supply all cable, H-frames and everything you need for a turnkey

solution. 

 

Azimuth plot of the 6el 50MHz LFA-3

 

 

Manufactured the right way, not the cheapest way! 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Downloads