Triband Yagi XR3 Tri-bander - 6 element Contest Yagi 20/15/10
Review by QST magazine on our US version can be found HERE
The Force12 XR3 - A 6 element tribander HF Super-compact Contest Yagi covering the 20m/15m/10m bands with a single feed point
The XR3 tri-bander was inspired by the C3 Force12 tribander providing the traditional HF 3 bands of 20m/15m/10m. Furthermore it is much smaller than the C3, comes with a capacity loaded 20m element options (XR3C which reduces the longest element from 11.6m to 8.9m) and reduced turning radius too! The XR3 is set to become a market-leader very quickly, why not be ahead of the pack with this one and get your order in early!
SWR coverage: Better than 1.5:1 from 14-14.35Mhz without an ATU or re-tuning
2 active elements
SWR coverage: Better than 1.9:1 from 21-21.45Mhz without an ATU or re-tuning 1.5:1 coverage 300Khz
2 active elements
SWR coverage: Better than 1.5:1 from 28-28.6Mhz without an ATU or re-tuning 1.9:1 SWR up to 28.7Mhz
2+ active elements
Power Rating: 5kw
Boom Length: 3.1 Metres
Turning Radius: 5.28 Metres
Wind Loading: 0.8 Square Metres
Wind Survival: up to 201KPH / 125MPH
Other options available if higher wind loading/survival is required.
Stacking Distance: 7 - 12m ( 11m recommended)
The boom is made from 45mm diameter square tube with a wall thickness of 3.2mm and thus is super-rigid. The largest diameter elements are the 20m elements which are 32mm diameter in the centre (with 3.2mm wall) tapering quickly to 9.5mm. Marine grade stainless steel is used throughout our antennas. No guying or boom truss is needed with this antenna.
Our antennas are constructed with the best quality materials in order that the best mechanical construction can be achieved, not the cheapest and most profitable!
Note: Much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up of our antennas have least effect on performance and pattern degradation. More information can be found here
An XR4 part-constructed. Note the elevated 10m elements, one of the secrets of this super-compact multi-band Yagi
A Cross-section of the driven elements on the XR4 installed with 'high-power' phasing lines
- Marine grade Stainless Steel Fittings*
- Original Stauff Insulation clamps
- Mill finished boom and elements for highest levels of accuracy
20m azimuth plot when placed 20m above ground. Note 11.35dBi including ground gain
15m azimuth plot when placed 20m above ground. Note 11.69dBi including ground gain