11 element 88-108MHz Log Periodic
A Super Wide Band, High Performance Broadcast (88-108MHz) Log Periodic Dipole Array
Most broadcast band antennas on the market today are very old designs. In fact many were developed using the 'cut and try' methods of optimisation where real world adjustments are made to an antenna and then tests are conducted on a range. This is not the best way to get the most from any Yagi, especially very wide band examples that need to provide constant levels of performance over a wide range of frequencies. The best method of achieving results is to use the very latest computer optimisation methods available today. Enter the InnovAntennas broadcast band High Performance Log Periodic! With the InnovAntennas HP-LPDA for broadcast applications, even weak (DX) stations can be received with ease, no matter where, within the 20MHz spread (that this antenna has), they fall. Take a look at the rolling performance plots below and see how constant the produced gain of the OP-DES can be.
The FMDX range of High Performance Log Periodic Dipole Arrays by InnovAntennas and why they will suit your needs
The FMDX-11 is one of 3 brand new Log periodic designs by InnovAntennas. These arrays have been designed to be strong, light weight and most important of all, to give unparalleled performance from a low-profile package for FM band DX'ing. Many DX antennas provide good gain and F/B that is OK but usually there is a compromise. If the antenna is 2 dimensional (uses one reflector for example rather than multiple reflectors) the antenna can provide broadband performance but F/B will suffer. Some antennas provide good F/B but at the cost of high visual impact through large reflector arrays. The FMDX range provide all the benefits of the concentrated element array with multiple reflectors in a single-plane, low-profile and light weight package.
In addition to the superior electromagnetic design, as with all antennas by InnovAntennas, build is of the highest quality with marine grade stainless steel being used throughout. For the very best in performance and build quality you only need to remember one name, InnovAntennas!
Some of the Mechanical design benefits include:
- Marine grade Stainless Steel Fittings*
- Original Stauff insulator clamps
- Mill finished for highest levels of accuracy
If you are looking for the best of the best from both a performance and mechanical construction perspective then look no further, you have come to the right place!
A Demo video showing how good F/B ratio on this antenna is: https://www.youtube.com/watch?v=MukGDyRDirg
'It performs like nothing I've ever seen. In the USA, we have some 3000 watt TV stations that broadcast FM audio on 87.75. There are 3 of them within 375 miles of me and with this antenna, I have heard them all! The gain and directivity far exceed the APS-13 that I took down. Somehow the word "amazing" doesn't do this justice.'
Typical Gain: 9.5dBi
Typical F/B: 33dB
Gain at 10m (33') above ground: 15.58dBi
Power Rating: 3kw
Feed Impedance: 75 Ohm or 50Ohm
Boom Length: 4.1m - 13'5''
Weight: 2.82Kg / 6.21LB
Turning Radius: 1.903m / 6.24ft
Wind Loading: 0.02 Square Metres / 0.56 Square feet
Wind Survival: 150PH / 90MPH
If you wish to stack several antennas, contact us for more information
This antenna has all elements made from 1/2 inch aluminium thick wall tube. The parasitic elements are also 1/2 inch. All elements are electrically connected to the boom held in place by marine grade stainless steel components.
The boom is 3/4'' inch square (19.05mm) which is in 3 sections. two sections of boom form the feedline and antenna element support, the third section provides a boom support truss.
If you want an antenna to last and perform in all weathers without SWR or bandwidth shifting, this is it.
The 11 element High Performance FMDX-11 Log Periodic Dipole Array by InnovAntennas
Elevation plot of the FMDX-11 placed 10m (33') above ground. Note the huge rear suppression to help you receive what you are pointing at, not what is behind you!
Manufactured the right way, not the cheapest way!
* Where possible marine grade stainless steel components are used.