2 element 70MHz LFA-Q Super-Gainer Rear Mounting Quad style Yagi

Brand: InnovAntennas
Product Code: 2 element 70MHz LFA-Q Super-Gainer Rear Mounting Quad style Yagi
Availability: 1-3 weeks
1.089kr
Ex Tax: 871kr
From 50kr

Qty

 

A 2 element LFA-Q (Super-rigid Quad-style) Super-Light Quad Style Yagi for 69.9-70.5MHz

The LFA-Q Packs a bigger punch than a traditional Yagi with MUCH MORE GAIN per metre of boom

If it is GAIN you want from a small boom, you have come to the right place

Why Rear Mount?

One good reason is to allow another rear mount antenna on the other side of your mast and hence doubling the bands you can cover!

Checkout the TX Factor online review! http://m0scu.uk/tx-factor-episode-7/

Another impressive design from G0KSC, 'The Quad has been InnovAted!' A Quad-style antenna with full wave length loop elements which provide a number of benefits. First, if the elements are of reasonable thickness (as ours are, they are not wire!) then good bandwidth coverage can be achieved. Next, up to around 7 elements (1.5wl) much better gain per metre of boom can be achieved than would otherwise be possible from a traditional Yagi covering the same bandwidth. Finally, with the dual-boom structure and 1/2'' diameter elements, the LFA-Q is extremely rigid and can stand up to some serious weather conditions!

IDEAL PORTABLE OR SOTA USE!

Despite it's rigidity, the LFA-Q is extremely light weight and this means even in strong winds, snow and ice the LFA-Q will hold its own.

Our antennas are constructed with the best quality materials in order that the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, ensuring they work as well as our software model predicts.

  • Marine grade stainless steel fittings
  • Original Stauff Insulation clamps
  • Mill finished boom and elements for highest levels of accuracy

 


Performance

Gain: 6.77dBi @ 70.2MHz

F/B: 16.7dB @ 70.2MHz

Peak Gain: 6.88dBi

Gain 10m above ground: 12.47dBi

Peak F/B: 16.95dB

Power Rating: 5kw

SWR: Below 1.4.1 from 69.9MHz to 70.5MHz

Boom Length: 59cms (including rear mount) 29cms between elements

Loop Height: 50cms

Weight: 0.7kg/1.2lbs

Safe Wind Speed: 160Kph/100Mph

Turning Radius: 1.855m/6ft

Vertical Stacking: 2.2m

 

Specification

This antenna is made with a 1/2 inch (12.7mm) and 3/8 inch (9.525mm) diameter tube for the LFA-Q and the boom sections are 3/4'' 19mm diameter. This antenna is not made cheaply, it is made to perform and to do so for many years with Marine Grade Stainless Steel fixings.

No figures are made up here as they are in some Ham Radio adverts, all performance figures are verified in the very latest software simulation packages with some antennas being professionally confirmed on an antenna range.

 

alt

Azimuth Plot

 

alt

Elevation Plot 10m above ground

 

alt

SWR

 

Manufactured the right way, not the cheapest way!

* Where possible marine grade stainless steel components are used.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Downloads